Alaska Configuration

1.356,36

The Alaska Floor Mounted Diesel Heater is ideal for small to medium size vessels (30 – 60 feet) or to heat up a cabin of 40 to 80 Cbm. A compact and economical burning fireplace that produces a cozy, comfortable dry heat. The stove comes with a large window through which the flames can be watched and enjoyed. The fuel regulator is nicely positioned behind the cover and still can be accessed easily.

With this configuration, you can order the Alaska Diesel Heater with the essential and recommended parts. You can make your own selection and add it to your shopping cart with one click. When you are not sure about your selection, please continue and download cart as pdf. With this pdf please contact us for advice. We are happy to help you.

This item: Alaska Configuration
1.356,36
1.356,36
64,23
176,20
140,42
129,09
79,59
140,89
184,27
184,27
41,45
54,29
1 × Low Pressure Fuel Pumps
Model
126,97154,28
79,69
17,05
1 × Stainless Steel Fuel Tank
Size
338,99460,04
44,04
378,09
1 × One Turn Coil (Newport, Alaska)
Installation
130,23180,24
1 × Radex Radiator Hot Water Forced Air Heater - Single or Double
Type
378,65522,44
SKU: 00-ALA-1

Description

  • Requires 3” (7,62 cm) diameter chimney parts.
  • Minimum 1,2 meter of chimney is required, a 1,8 meter straight run with no elbows works best.
  • We always recommend a barometric damper; to absorb wind fall and to stimulate draft • Barometric Damper Installation & Operation.
  • Permanent fresh air vent needed in direct area of the unit.
  • Provides radiant heat which will dry out moisture inside the vessel/cabin.
  • Almost identical model to the Newport bulkhead model but is a floor mount heater.
  • In sailboat installations, this unit must face fore or aft, if facing port or starboard is desired, the valve would need to be mounted to the side of the unit so the gravity fed valve won’t starve the burner on heels up to 15 degrees.
  • 12v draft assist fan included (can be converted to 24v). Used for startup and draft assistance on high fire and low draft.
  • Valve is calibrated for diesel but can be re-calibrated for kerosene or stove oil.
  • Hot water coil for 19 – 38 or 76 – 140 liter can be installed for water heating.
1-turn or 4-turn coil.

Additional information

Dimensions
Width

Height

Depth

Weight

Fuel consumption / 24h
Low (Liter)

High (Liter)

Heat output
Low (kWh)

High (kWh)

Diesel Heater manual

Diesel appliance operating tips