Bering Cook Stove

2.162,16 (1.801,80 ex. VAT)

The Bering Cook Stove is our utility model ideal for medium size vessels. The Bering is designed for galley’s that are lacking in width. Please notice that it is manufactured with a single stainless-steel wall and its unique single latch door. This model has the chimney outlet exiting from the right side of the cast-iron top. The cooking surface and oven size is similar to the Pacific stove.

*Ships on a pallet

Request an offer


  • Requires 5” (12,7 cm) diameter chimney parts.
  • Minimum 1,2 meter of chimney is required with a maximum of 1,8 meter, a straight run of 1,4 meter with no elbows works best.
  • We always recommend a barometric damper; to absorb wind fall and to stimulate draft • Barometric Damper Installation & Operation.
  • Permanent fresh air vent needed in area of the unit.
  • Creates a dry heat to dry out moisture inside the vessel.
  • Exhaust chimney exits on the right side of cast iron cooktop.
  • In sailboat installations, this unit must face fore or aft, if facing port or starboard is desired, the valve would need to be mounted to the side of the unit so the gravity fed valve won’t starve the burner on heels up to 15 degrees.
    12v draft assist fan included (can be converted to 24v). Used for startup and draft assistance on high fire.
  • Valve is calibrated for diesel but can be re-calibrated for kerosene or stove oil.
  • 1 turn hot water coil for 19 – 38 liter or a 2 turn hot water coil for 57 – 76 liter can be installed for water heating.

Additional information





Oven dimensions

26 cm


26 cm


32 cm

Heat output
Low (kWh)

High (kWh)

Fuel consumption / 24h
Low (Liter)

High (Liter)

Diesel Stove manual

Diesel appliance operating tips