Newport Configuration

1.414,71

The Newport Bulkhead Mounted Heater is ideal for small to medium size vessels. Small, compact, and bulkhead mounted. An attractive, economical diesel burning heater, providing comfortable, dry heat.

With this configuration, you can order the Newport Diesel Heater with the essential and recommended parts. You can make your own selection and add it to your shopping cart with one click.

This item: Newport Configuration
1.414,71
1.414,71
64,23
176,19
140,43
129,10
79,59
140,89
184,27
184,27
41,46
54,29
1 × Low Pressure Fuel Pumps
Model
126,97154,28
79,69
17,05
1 × Stainless Steel Fuel Tank
Size
338,99460,04
44,04
378,09
1 × One Turn Coil (Newport, Alaska)
Installation
130,24180,24
1 × Radex Radiator Hot Water Forced Air Heater - Single or Double
Type
378,65522,45
SKU: 00-NEW-1

Description

  • Requires 3” (7,62 cm) diameter chimney parts.
  • Minimum 1,2 meter of chimney is required, a 1,8 meter straight run with no elbows works best.
  • We always recommend a barometric damper, mainly to absorb wind fall.
  • Permanent fresh air vent needed in direct area of the unit.
  • Decorative laser cut valve cover.
  • Creates a dry heat to dry out moisture inside the vessel.
  • In sailboat installations, this unit must face fore or aft, so the gravity fed valve won’t starve the burner on heels up to 15 degrees. Alternative is, that the valve is to be replaced/remounted on the side of the heater.
  • 12v draft assist fan included (can be converted to 24v and 32v). Used for start up and draft assistance on high fire.
  • Valve is calibrated for diesel but can be re-calibrated for kerosene or stove oil.
  • 1 turn hot water coil for 19 – 38 liter can be installed for water heating.

Additional information

Dimensions
Width

Height

Depth

Weight

Fuel consumption / 24h
Low (Liter)

High (Liter)

Heat output
Low (kWh)

High (kWh)

Diesel Heater manual

Diesel appliance operating tips